Spring Hoe Kit

Manufacturer Part Number:

Tilmor Part Number:

by Thiessen Tillage Equipment

Starting at $216.38



Spring Hoe Orientation

Spring Hoe Right and Left Kit

Both Right and Left Spring Hoes for one row. The Kit includes 2 right and 2 left spring hoes and 2 mounting plates that complete spring hoe parts for one row.

Includes Hardware for Spring Hoes and Shank/Clamp

right spring hoe kit

This Kit includes 2 right spring hoes and 1 mounting plate for one side.

Includes Hardware for Spring Hoes and Shank/Clamp

Left spring hoe kit

This Kit includes 2 left spring hoes and 1 mounting plate for one side.

Includes Hardware for Spring Hoes and Shank/Clamp

Shank Option:

Shank not included.

Flat Shank - 1-3/16" x 3/8"

Includes 2 shank for right and left spring hoes. Pair with flex-tine mounts for greater flexibility in rocky conditions.

Dimensions: 13.56" x 1.19" x .375"

Offset Flat Shank - 1-3/16" x 3/8"

Includes 2 Shanks for Right and Left Spring Hoes.
Dimensions: 13.56" x 1.19" x .375" with a .44" offset where the implement mounts.

aluminum tool standard flat shank

Includes 2 shanks for right and left hoes.  
For walk-behind toolbars. 
Dimensions: 1/2" x 1-1/4" x 13-3/4"

round shank 1-1/4"

Includes 2 shanks for right and left spring hoe.
1-1/4" Round shank to adjust tool angle and depth.

Two holes in mounting plate are made for 3/8" carriage bolts, 1-13/16" center-to-center separation.

Shank Length: 23.44"

7/8" Round Shank

Includes 2 shanks for right and left spring hoe.
7/8" Round Shank used to adjust tool angle and depth.

Clamp:

Clamp not included.

Includes 2 Flex Tine Mounts and Clamps for a 2x2 Inch square tube.

The Flex Tine Mount (or Flat Shank Flex Mount) mounts to a 2" square toolbar and allows for more independent movement of the arms and more flexibility in rocky conditions.

Clamp for rectangle shank tools

Includes 2 clamps for right and left spring hoes.
The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
One adjustment bolt secures both horizontal movement of the clamp and vertical movement of the shaft.
Adjustment bolt and nut are easily replaceable when worn. Adjustment bolt pushes against a flat plate to protect toolbar from damage.

flat shank to 1.5 inch square tube clamp

Includes 2 clamps for right and left spring hoes.
The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 1.5" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

flat shank to 2 inch square tube clamp

Includes 2 clamps for right and left spring hoes.
The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Clamp:

Clamp not included.

Clamp for rectangle shank tools

Includes 2 clamps for right and left spring hoes.
The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
One adjustment bolt secures both horizontal movement of the clamp and vertical movement of the shaft.
Adjustment bolt and nut are easily replaceable when worn. Adjustment bolt pushes against a flat plate to protect toolbar from damage.

flat shank to 1.5 inch square tube clamp

Includes 2 clamps for right and left spring hoes.
The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 1.5" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

flat shank to 2 inch square tube clamp

Includes 2 clamps for right and left spring hoes.
The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Includes 2 Flex Tine Mounts and Clamps for a 2x2 Inch square tube.

The Flex Tine Mount (or Flat Shank Flex Mount) mounts to a 2" square toolbar and allows for more independent movement of the arms and more flexibility in rocky conditions.

Clamp:

Clamp not included.

standard cross clamp - rectangular toolbar to flat shank

Includes 2 clamps for right and left spring hoes.
Fits standard rectangular PJ or Thiessen bars.

center mount- rectangular toolbar to flat shank

Includes 2 clamps for right and left spring hoes.
Can be used to attach tooling in the center of the front rectangular walk behind toolbar, or along the sides of the trailing arms.

1.5" tube to flat shank

Includes 2 clamps for right and left spring hoes.
For Thiessen Flat Shanks.

McBitey Center Clamp for WalkBehind

Includes 2 clamps for right and left spring hoes.
Flat shank clamp to place tooling on the middle section of Thiessen Hitch.

Clamp:

Clamp not included.

Clamp for Round Shanks and Vegetable Knives

Includes 2 clamps for right and left spring hoes.
Fabricated plate with U-bolts that hold up to a 1-1/4" round shank and designed to mount on a 2" square tool bar.

Clamp for 1-1/4" Round Shanks

Includes 2 clamps for right and left spring hoes.
Easy adjustment of tools and spacing for growers needing to adapt to various crops and conditions. Holds up to an 1-1/4" round shank and designed to mount on a 2" square tool bar.

Clamp:

Clamp not included.

Clamp for Round Shanks and Vegetable Knives

Fabricated plate with U-bolts that hold up to a 1-1/4" round shank and designed to mount on a 2" square tool bar.

Clamp for 1-1/4" Round Shanks

Includes 2 clamps for right and left spring hoes.
Easy adjustment of tools and spacing for growers needing to adapt to various crops and conditions. Holds up to an 1-1/4" round shank and designed to mount on a 2" square tool bar.

7/8 round shank clamp

Includes 2 clamps for right and left spring hoes.
Clamps hiller discs or other tools that use a 7/8” diameter round shank standard to 1/2-5/8 x 1-1/4" toolbars.

7/8" Round Shank Clamp for 1.5" Toolbar

Includes 2 clamps for right and left spring hoes.
The Round Shank Clamp fits a 7/8" round shank and mounts it rigidly to the 1.5" square toolbar.

Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Tool Tip: When installing the clamp on a toolbar, insert the bolts that hold the half-moon plate and spin on the nuts loosely. Tighten the bolts that push the shank against the toolbar securely. Then tighten the nuts that secure the half-moon plate.

7/8 round shank clamp on 1.5" square tube

Includes 2 clamps for right and left spring hoes.
Round Shank Clamp for 7/8" round shank. Clamps on 1.5" square tube.

Shank Option:

Shank not included.

Flat Shank - 1-3/16" x 3/8"

Includes 1 Shank for Spring Hoe.

Pair with flex-tine mounts for greater flexibility in rocky conditions.

Dimensions: 13.56" x 1.19" x .375"

Offset Flat Shank - 1-3/16" x 3/8"

Includes 1 Shank for Right Spring Hoe.

Dimensions: 13.56" x 1.19" x .375" with a .44" offset where the implement mounts.

aluminum tool standard flat shank

Includes 1 Shank for Spring Hoe.

For walk-behind toolbars. 
Dimensions: 1/2" x 1-1/4" x 13-3/4"

round shank 1-1/4"

Includes 1 Shank for Spring Hoe.

1-1/4" Round shank to adjust tool angle and depth.

Two holes in mounting plate are made for 3/8" carriage bolts, 1-13/16" center-to-center separation.

Shank Length: 23.44"

7/8" Round Shank

Includes 1 Shank for Spring Hoe.

7/8" Round Shank used to adjust tool angle and depth.

Clamp:

Clamp for rectangle shank tools

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
One adjustment bolt secures both horizontal movement of the clamp and vertical movement of the shaft.
Adjustment bolt and nut are easily replaceable when worn. Adjustment bolt pushes against a flat plate to protect toolbar from damage.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

flat shank to 1.5 inch square tube clamp

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 1.5" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

flat shank to 2 inch square tube clamp

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

Includes Flex Tine Mount and Clamp for a 2x2 Inch square tube.

The Flex Tine Mount (or Flat Shank Flex Mount) mounts to a 2" square toolbar and allows for more independent movement of the arms and more flexibility in rocky conditions.

Clamp:

Clamp for rectangle shank tools

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
One adjustment bolt secures both horizontal movement of the clamp and vertical movement of the shaft.
Adjustment bolt and nut are easily replaceable when worn. Adjustment bolt pushes against a flat plate to protect toolbar from damage.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

flat shank to 1.5 inch square tube clamp

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 1.5" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

flat shank to 2 inch square tube clamp

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

Includes Flex Tine Mount and Clamp for a 2x2 Inch square tube.

The Flex Tine Mount (or Flat Shank Flex Mount) mounts to a 2" square toolbar and allows for more independent movement of the arms and more flexibility in rocky conditions.

Clamp:

standard cross clamp - rectangular toolbar to flat shank

Fits standard rectangular PJ or Thiessen bars.

center mount- rectangular toolbar to flat shank

Can be used to attach tooling in the center of the front rectangular walk behind toolbar, or along the sides of the trailing arms.

1.5" tube to flat shank

For Thiessen Flat Shanks. Will not fit Tilmor red flat shanks!

McBitey Center Clamp for WalkBehind

Flat shank clamp to place tooling on the middle section of Thiessen Hitch.

Clamp:

Clamp for Round Shanks and Vegetable Knives

Fabricated plate with U-bolts that hold up to a 1-1/4" round shank and designed to mount on a 2" square tool bar.

Clamp for 1-1/4" Round Shanks

Easy adjustment of tools and spacing for growers needing to adapt to various crops and conditions. Holds up to an 1-1/4" round shank and designed to mount on a 2" square tool bar.

Clamp:

Clamp for Round Shanks and Vegetable Knives

Fabricated plate with U-bolts that hold up to a 1-1/4" round shank and designed to mount on a 2" square tool bar.

Clamp for 1-1/4" Round Shanks

Easy adjustment of tools and spacing for growers needing to adapt to various crops and conditions. Holds up to an 1-1/4" round shank and designed to mount on a 2" square tool bar.

7/8 round shank clamp

Clamps hiller discs or other tools that use a 7/8” diameter round shank standard to 1/2-5/8 x 1-1/4" toolbars.

7/8" Round Shank Clamp for 1.5" Toolbar

The Round Shank Clamp fits a 7/8" round shank and mounts it rigidly to the 1.5" square toolbar.

Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Tool Tip: When installing the clamp on a toolbar, insert the bolts that hold the half-moon plate and spin on the nuts loosely. Tighten the bolts that push the shank against the toolbar securely. Then tighten the nuts that secure the half-moon plate.

7/8 round shank clamp on 1.5" square tube

Round Shank Clamp for 7/8" round shank.
Clamps on 1.5" square tube.

Shank Option:

Shank not included.

Flat Shank - 1-3/16" x 3/8"

Includes 1 Shank for Spring Hoe.

Pair with flex-tine mounts for greater flexibility in rocky conditions.

Dimensions: 13.56" x 1.19" x .375"

Offset Flat Shank - 1-3/16" x 3/8"

Includes 1 Shank for Spring Hoe.

Dimensions: 13.56" x 1.19" x .375" with a .44" offset where the implement mounts.

aluminum tool standard flat shank

Includes 1 Shank for Spring Hoe.

For walk-behind toolbars. 
Dimensions: 1/2" x 1-1/4" x 13-3/4"

round shank 1-1/4"

Includes 1 Shank for Spring Hoe.

1-1/4" Round shank to adjust tool angle and depth.

Two holes in mounting plate are made for 3/8" carriage bolts, 1-13/16" center-to-center separation.

Shank Length: 23.44"

7/8" Round Shank

Includes 1 Shank for Spring Hoe.

7/8" Round Shank used to adjust tool angle and depth.

Clamp:

Clamp for rectangle shank tools

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
One adjustment bolt secures both horizontal movement of the clamp and vertical movement of the shaft.
Adjustment bolt and nut are easily replaceable when worn. Adjustment bolt pushes against a flat plate to protect toolbar from damage.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

flat shank to 1.5 inch square tube clamp

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 1.5" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

flat shank to 2 inch square tube clamp

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

Includes Flex Tine Mount and Clamp for a 2x2 Inch square tube.

The Flex Tine Mount (or Flat Shank Flex Mount) mounts to a 2" square toolbar and allows for more independent movement of the arms and more flexibility in rocky conditions.

Clamp:

Clamp for rectangle shank tools

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
One adjustment bolt secures both horizontal movement of the clamp and vertical movement of the shaft.
Adjustment bolt and nut are easily replaceable when worn. Adjustment bolt pushes against a flat plate to protect toolbar from damage.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

flat shank to 1.5 inch square tube clamp

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 1.5" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

flat shank to 2 inch square tube clamp

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Does not fit Steketee, Garford, or Thiessen Tillage Finger Weeder Shanks!

Includes Flex Tine Mount and Clamp for a 2x2 Inch square tube.

The Flex Tine Mount (or Flat Shank Flex Mount) mounts to a 2" square toolbar and allows for more independent movement of the arms and more flexibility in rocky conditions.

Clamp:

standard cross clamp - rectangular toolbar to flat shank

Fits standard rectangular PJ or Thiessen bars.

center mount- rectangular toolbar to flat shank

Can be used to attach tooling in the center of the front rectangular walk behind toolbar, or along the sides of the trailing arms.

1.5" tube to flat shank

For Thiessen Flat Shanks. Will not fit Tilmor red flat shanks!

McBitey Center Clamp for WalkBehind

Flat shank clamp to place tooling on the middle section of Thiessen Hitch.

Clamp:

Clamp for Round Shanks and Vegetable Knives

Fabricated plate with U-bolts that hold up to a 1-1/4" round shank and designed to mount on a 2" square tool bar.

Clamp for 1-1/4" Round Shanks

Easy adjustment of tools and spacing for growers needing to adapt to various crops and conditions. Holds up to an 1-1/4" round shank and designed to mount on a 2" square tool bar.

Clamp:

Clamp for Round Shanks and Vegetable Knives

Fabricated plate with U-bolts that hold up to a 1-1/4" round shank and designed to mount on a 2" square tool bar.

Clamp for 1-1/4" Round Shanks

Easy adjustment of tools and spacing for growers needing to adapt to various crops and conditions. Holds up to an 1-1/4" round shank and designed to mount on a 2" square tool bar.

7/8 round shank clamp

Clamps hiller discs or other tools that use a 7/8” diameter round shank standard to 1/2-5/8 x 1-1/4" toolbars.

7/8" Round Shank Clamp for 1.5" Toolbar

The Round Shank Clamp fits a 7/8" round shank and mounts it rigidly to the 1.5" square toolbar.

Two bolts secure both horizontal movement of the clamp and vertical movement of the shaft.
With its unique design, this clamp can be removed or added to a toolbar without having to remove additional tooling on the toolbar. It can also be positioned between two welded pieces on a toolbar.

Tool Tip: When installing the clamp on a toolbar, insert the bolts that hold the half-moon plate and spin on the nuts loosely. Tighten the bolts that push the shank against the toolbar securely. Then tighten the nuts that secure the half-moon plate.

7/8 round shank clamp on 1.5" square tube

Round Shank Clamp for 7/8" round shank.
Clamps on 1.5" square tube.

Price:

Est. ship date: Jun 18, 2024

Ships in 2-3 business days

This product, or its configuration, is out of stock. Call for Availability.

This product or its configuration is coming soon.

Call for availability

Qty


Name Right and Left Spring Hoe Kit Right Side Spring Hoe Kit Left Side Spring Hoe Kit
Image Spring Hoe Right and Left Kit right spring hoe kit Left spring hoe kit
Tilmor Part Number KIT-1090 KIT-1088 KIT-1089
Manufacturer Part Number N/A N/A N/A
Weight 4.84 lbs. 3.64 lbs. 3.64 lbs.
California Residents WARNING: Click here for more information on Proposition 65
Warranty Limited 1 year warranty to original owner. Click here for more information.