Choose a Location United States Canada Australia Other…
Log In Cart
1-844-255-5864
Cart
  1. Products
  2. Cultivation
  3. Finger Weeding

Discontinued Product

This product is no longer available.

Finger Weeder (2018)

Manufacturer Part Number:

Tilmor Part Number:

by Tilmor Ox Logo - Gray

Starting at: $162.00 - $88.00

13" Finger Weeder with Medium Fingers and Flat Shank
New version available!

Finger Weeders
Starting at: $195.00

Specifically designed for in-row cultivation, the finger weeder ensures small and just emerging weeds are uprooted and dried out.
The ground engaging steel drive plate turns the flexible polyurethane fingers at a faster speed to "flick" out emerging weeds at the hair stage.
Compatible with Steketee and Garford mounts/clamps.
Shank Dimensions: Length = 13-3/4" x Width = 1-3/16" x Thickness = 3/8"

Finger Diameter

Tilmor Finger Weeder

For row spacings as close as 12-inches

Finger Hardness

13" Hard Finger Replacement

Recommended for use in clay based soils with hardier crops.
Buy Replacements Here

Medium polyurethane finger for 13" Finger Weeder replacement

Recommended for use in sandy, lighter soils with delicate crops.
Buy Replacements Here

Toolbar Clamps

Toolbar clamps are not included with Finger Weeders, so you must provide your own or select from the options made for Tilmor toolbars. Tilmor mounting brackets are built for 2” square toolbars.

Clamp for rectangle shank tools

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
Learn More

Flex Tine Mount for flat shank implements

The Flex Tine Mount (or Flat Shank Flex Mount) mounts to a 2" square toolbar and allows for more independent movement of the arms and more flexibility in rocky conditions. Finger Weeders and other knives/blades with a rectangle shank of 3/8” x 1-3/8” profile will fit the Flex Tine Mount.

Tilmor Finger Weeder Cultivating Soybeans

Reduce your impact - Maximize your results

In-row cultivation is a challenging part of any farm operation. Finger weeders make this job easier, by reducing the need for hand hoeing and ensuring small, germinating weeds are tossed out.

How it works:

  • The polyurethane fingers turn in between the crop row, driven by the steel fingers, dislodging small weeds.
  • Ball-bearing construction ensures trouble free operation.
  • Ideal for use in well established brassicas like broccoli, cauliflower, and cabbage.
  • The Finger weeder is suitable for weeding at typical cultivation speeds.

In-row mechanical weeding - Retire the hoe

Weed reduction

Research has shown a weed reduction of 60 percent is feasible by using finger weeders. Finger weeders are most effective when stacking with tools that run in front of the fingers such as beet knives and torsion weeders. This percentage could be increased to 90 percent by combining the finger weeder with a torsion weeder.

Parts

The finger weeder is available as a whole and in single weeders or single discs. The rubber fingers are available in different hardnesses.

Tilmor Finger Weeder Cultivating Soybeans
Name 13 inch 13" Hard Finger - Black Medium None 2" Flat Shank Clamp Flex Tine Mount
Image Tilmor Finger Weeder 13" Hard Finger Replacement Medium polyurethane finger for 13" Finger Weeder replacement Clamp for rectangle shank tools Flex Tine Mount for flat shank implements
Tilmor Part Number 49-0005 AW-3012 AW-3011 N/A AA-9005 AA-9020
GTIN 00850002085006 00850002085020 00850002085013 00850002085037 00850002085044
Manufacturer Part Number N/A N/A N/A N/A N/A N/A
Weight 7.95 lbs. 1.3500 lbs. 1.3500 lbs. 0 lbs. 2.0000 lbs. 7.4000 lbs.
California Residents WARNING: Click here for more information on Proposition 65
Warranty Limited 1 year warranty to original owner. Click here for more information.