A step by step guide to assembling the Thiessen Adaptive Cultivator System with Doug and Dustin of Tilmor. Follow along in real time as Doug and Dustin unbox all components of the ACS and assemble them. The adaptive cultivator system is a weed control tool for vineyards, trellised orchards, hemp and fence lines. Using a 27" finger weeder head supported by a flexible torsion arm it requires no electronic or hydraulic input as it works to eliminate weeds in the crop row without damaging the established crop. The fingers are able to run right up to, and around the crop without operator input and does not leave an unworked area like a radius on a grape hoe and the machine excels at working speeds of 4-7mph depending on soil and crop conditions. Running ahead of the finger weeders are a gang of four spiders that work to control weeds alongside the row. Depending on how they are set, they can also be used to move a small amount of soil towards or away from the crop row. These spiders also run on a flexible torsion mount which allows them to adjust to contours on the ground without operator input. A rigid guard designed to deflect vines, trees or other crops protects both the crop and the equipment from damage.

This video shows the vineyard weeder adjustments that enables the unit to de-hill vines whether its for weed control or after overwintering. Watch to see how the mechanically driven Adaptive Cultivation System (ACS) works to control undervine weeds.

In this video Lydell gives an overview of how finger weeders work, where they can be used, and the different types of finger weeders. The Tilmor Finger Weeder is typically used for inner-row weeding. The finger weeder uproots small and just emerging weeds. The ground engaging steel drive plate turns the flexible polyurethane fingers at a faster speed to "flick" out emerging weeds at the hair stage. They can also be used to cultivate the edges of plastic mulch and in vineyards and nurseries.

This video shows the vineyard weeder adjustments that enables the unit to hill vines whether its for weed control or winter injury prevention. Watch to see how the mechanically driven Adaptive Cultivation System (ACS) works to control undervine weeds.

In this video, Ryan goes over key adjustments to run the Adaptive Cultivation System (ACS) on a low horsepower tractor. Watch to see how this 2,000 lb. tractor takes out undervine weeds in this vineyard.

Ryan Thiessen of Thiessen Tillage gives a basic overview of different areas of adjustment of the Adaptive Cultivator System. The Adaptive Cultivator System is a weed control tool for vineyards, trellised orchards, hemp and fence lines. It is primarily used as a maintenance tool and not an aggressive tillage tool.

En este video, Lydell Steiner y Douglas Zehr brindan una descripción general del cultivador adaptativo y ofrecen una guía sobre cómo se usa mientras responden preguntas frecuentes. El sistema de cultivador adaptativo es una herramienta de control de malezas para viñedos, huertos en espaldera, cáñamo y cercas. Con un cabezal de desbrozadora de dedos de 26 "sostenido por un brazo de torsión flexible, no requiere entrada electrónica o hidráulica, ya que funciona para eliminar las malezas en la hilera de cultivo sin dañar el cultivo establecido. Los dedos pueden correr hasta el cultivo y alrededor de él. sin intervención del operador y no deja un área sin trabajar como hace la azada de uva. La máquina sobresale a velocidades de trabajo de 4-7 mph dependiendo de las condiciones del suelo y del cultivo.

Managing weeds on a 15-acre blueberry farm isn’t easy, but Mark Boulet of Tango FoxTrot Farms has found a smarter way. As a *veteran-owned farm*, Mark uses an adaptive cultivation system to keep weeds in check while ensuring healthy, thriving crops. In this video, see how this innovative system helps him save time ⏳, reduce labor 💪, and boost efficiency ✅. Whether you're a blueberry grower or just interested in modern farming solutions, you won’t want to miss this

The Adaptive Cultivator System(ACS) is the best way to weed Pinot Noir with a compact tractor. John Rasberry's Farm is located in one of the seven spots to grow Pinot Noir grapes in the world and he has been using the ACS to eliminate weeds in his vineyard for the past two years. Its affordability and ability to mount onto John's existing compact tractor were stand-out features for him. The ACS is easy to use and its flexible polyurethane build does not damage the three-year-old vines.

Peter Winters at Seghesio Family Vineyards shares how they use the Theissen Adaptive Cultivation System to help control weeds on their 300 acre operation.

The Adaptive Cultivator System (ACS) is a weed control tool for vineyards, trellised orchards, hemp and fence lines. The ACS is primarily used as a maintenance tool and not an aggressive tillage tool. The 26" finger weeder head is supported by a flexible torsion arm that requires no electronic or hydraulic input as it works to eliminate weeds in the crop row without damaging the established crop. The fingers are able to run right up to, and around the crop without operator input and does not leave an unworked area at the base of the vine, like a radius on a grape hoe. The machine excels at working speeds of 4 to 7 mph depending on soil and crop conditions. Running ahead of the finger weeders are a gang of two spiders that work to break crust and control weeds alongside the row. Depending on how they are set, they can also be used to move a small amount of soil towards or away from the crop row. These spiders also run on a flexible torsion mount which allows them to adjust to contours on the ground without operator input. A rigid guard designed to deflect vines, trees or other crops protects both the crop and the equipment from damage.

Take your vineyard maintenance to the next level with the * Adaptive Cultivation System (ACS) * — a precision weeding tool designed to work right up to the vine without sensors or hydraulics. In this video, we demonstrate how the ACS tackles in-row weeds with ease, maintaining soil health and protecting established crops. You’ll also see how the * Vineyard & Orchard Disc Hiller * and the * Vine & Post Remover * complement the ACS to create a complete, efficient vineyard management system. Featured Tools: * 🌱 * Adaptive Cultivation System (ACS): * Flexible torsion-mounted fingers and Spyders for fast, precise weed control in vineyards, orchards, and trellised crops. 🌾 * Vineyard & Orchard Disc Hiller: * Adjustable, reversible design for hilling and de-hilling rows—perfect for winter prep or weed burial. 🍇 * Vine & Post Remover: * Heavy-duty pulling power for removing vines, posts, and more. Whether you're managing grapevines, hemp, or trellised orchards, this system helps you * weed smarter, not harder. *

This Adaptive Cultivator System (ACS) is cultivating three year old wine grapes in Sherwood, Oregon. John has 8 foot wide rows, which enables him to have the ACS mounted with the side lift mount on his John Deere 995 tractor. Soil conditions are not always perfect and in this video you will see moisture creating soil packing on the spyders. The Adaptive Cultivator System is a weed control tool for vineyards, trellised orchards, hemp and fence lines. The ACS is primarily used as a maintenance tool and not an aggressive tillage tool. The 26" finger weeder head is supported by a flexible torsion arm that requires no electronic or hydraulic input as it works to eliminate weeds in the crop row without damaging the established crop. The fingers are able to run right up to, and around the crop without operator input and does not leave an unworked area at the base of the vine, like a radius on a grape hoe. The machine excels at working speeds of 4 to 7 mph depending on soil and crop conditions. Running ahead of the finger weeders are a gang of two spiders that work to break crust and control weeds alongside the row. Depending on how they are set, they can also be used to move a small amount of soil towards or away from the crop row. These spiders also run on a flexible torsion mount which allows them to adjust to contours on the ground without operator input. A rigid guard designed to deflect vines, trees or other crops protects both the crop and the equipment from damage.

Y Knot Vineyard in Seagraves, TX uses the Adaptive Cultivation System to effortlessly manage weeds in their vineyard. The Adaptive Cultivator System (ACS) is a weed control tool for vineyards, trellised orchards, hemp and fence lines. The ACS is primarily used as a maintenance tool and not an aggressive tillage tool. The 26" finger weeder head is supported by a flexible torsion arm that requires no electronic or hydraulic input as it works to eliminate weeds in the crop row without damaging the established crop. The fingers are able to run right up to, and around the crop without operator input and does not leave an unworked area at the base of the vine, like a radius on a grape hoe. The machine excels at working speeds of 4 to 7 mph depending on soil and crop conditions. Running ahead of the finger weeders are a gang of two spiders that work to break crust and control weeds alongside the row. Depending on how they are set, they can also be used to move a small amount of soil towards or away from the crop row. These spiders also run on a flexible torsion mount which allows them to adjust to contours on the ground without operator input. A rigid guard designed to deflect vines, trees or other crops protects both the crop and the equipment from damage.

Fast, reliable vineyard weeding solution that works without damaging vines! It requires no electronic or hydraulic input and can be mounted on most tractors! The Adaptive Cultivator System (ACS) is a weed control tool for vineyards, trellised orchards, hemp and fence lines. The ACS is primarily used as a maintenance tool and not an aggressive tillage tool. The 26" finger weeder head is supported by a flexible torsion arm that requires no electronic or hydraulic input as it works to eliminate weeds in the crop row without damaging the established crop. The fingers are able to run right up to, and around the crop without operator input and does not leave an unworked area at the base of the vine, like a radius on a grape hoe. The machine excels at working speeds of 4 to 7 mph depending on soil and crop conditions. Running ahead of the finger weeders are a gang of two spiders that work to break crust and control weeds alongside the row. Depending on how they are set, they can also be used to move a small amount of soil towards or away from the crop row. These spiders also run on a flexible torsion mount which allows them to adjust to contours on the ground without operator input. A rigid guard designed to deflect vines, trees or other crops protects both the crop and the equipment from damage.

Watch the Thiessen ACS Unit and Hiller in-action. The Adaptive Cultivator System (ACS) is a weed control tool for vineyards, trellised orchards, hemp and fence lines. The ACS is primarily used as a maintenance tool and not an aggressive tillage tool. The 26" finger weeder head is supported by a flexible torsion arm that requires no electronic or hydraulic input as it works to eliminate weeds in the crop row without damaging the established crop. The fingers are able to run right up to, and around the crop without operator input and does not leave an unworked area at the base of the vine, like a radius on a grape hoe. The machine excels at working speeds of 4 to 7 mph depending on soil and crop conditions. Running ahead of the finger weeders are a gang of two spiders that work to break crust and control weeds alongside the row. Depending on how they are set, they can also be used to move a small amount of soil towards or away from the crop row. These spiders also run on a flexible torsion mount which allows them to adjust to contours on the ground without operator input. A rigid guard designed to deflect vines, trees or other crops protects both the crop and the equipment from damage. Hiller: Hill and dehill vineyards, orchards, and more with the easy to use hiller disc. This adjustable Disc Hiller can help you get your vines ready for winter or bury overgrown weeds. When dehilling, pair with the Adaptive Cultivation System (Vineyard Weeder) for optimal results. • Adjust horizontal and vertical angles for optimal usage • Reversible design to cut away or hill up soil • Mounts to any 2" Receiver • 20" Notched Heavy Duty Disc Blade

Do's & Donuts Episode Two features none other than the inventor of the ACS or Adaptive Cultivator System, Ryan Thiessen. Ryan gives a brief overview on some do's and don'ts of the ACS as well as some helpful information on the different adjustments possible with the unit. We decided to surprise Ryan with the "donuts" part of this video and this time we feature Amish Country Donuts of Sugarcreek, Ohio.

r decades, farmers have relied on the Basket Weeder to enhance early weed control, keeping their fields cleaner with minimal soil disturbance. Designed for inter-row weeding, its rotating wire baskets break up soil and uproot weeds while allowing crops to pass safely between them. It can also be used for stale seedbed preparation by positioning the baskets together to cultivate the entire surface, disrupting weeds before planting. For tougher conditions, the front basket can be replaced with spyders for better penetration in hard or compacted soil.

The market gardening rake is the essential tool for farms working on small surfaces according to the method of Jean-Martin Fortier or Eliot Coleman. Made of aluminum, this rake is perfect for breaking up small clods of soil, leveling the bed before planting, and pulling clods and stones into the footpath. It also allows you to mix the compost on the top of the bed in the case of an amendment. With a width of 30 or 40 inches, the robust but light design allows its user to work efficiently in the preparation of beds. Tine length is 4 inches.

The market gardening rake is the essential tool for farms working on small surfaces according to the method of Jean-Martin Fortier or Eliot Coleman. Made of aluminum, this rake is perfect for breaking up small clods of soil, leveling the bed before planting, and pulling clods and stones into the footpath. It also allows you to mix the compost on the top of the bed in the case of an amendment. With a width of 30 or 40 inches, the robust but light design allows its user to work efficiently in the preparation of beds. Tine length is 4 inches.

Terrateck has an extensive hand tool line up that features a wide range of tools and uses that any market garden can find benefit from! Here, Lydell from Tilmor and Romain from Terrateck give a brief overview of some of the different hand tools that are available as well as what they might be used for.

Romain and Lydell assemble the Terrateck Walk Behind Electric Greens Harvester

Comparing options for greens harvesting. Are you looking to scale up your salad greens production or speed up your harvest day? In this video, we compare four popular greens harvesters: the Terrateck Greens Harvest Knife, the Farmer’s Friend Quick-Cut Greens Harvester, the Terrateck Drill-Powered Greens Harvester, and the Terrateck Self-Propelled Greens Harvester. 🌾 HARVESTERS FEATURED IN THIS VIDEO: 1️⃣ Terrateck Greens Harvest Knife This is the most budget-friendly manual entry point designed for micro-farms, home growers, and small bed trials. It is great for precision cuts, requires zero fuel or battery overhead, and handles quick spot-harvests without complex setup. 2️⃣ Farmer’s Friend Quick-Cut Greens Harvester A classic market-gardening staple powered by a standard cordless drill. It features a serrated blade and rotating macrame reels that gently sweep salad mixes, spinach, and mesclun directly into your harvest tote. 3️⃣ Terrateck Drill-Powered Walk Behind Greens Harvester - https://www.tilmor.com/en-us/products/2024 A rugged, high-efficiency drill-driven alternative engineered for clean, uniform cuts across standard market garden beds. It is built with durable components and smooth height adjustment to handle dense plantings with minimal crop damage. 4️⃣ Terrateck Self-Propelled Walk Behind Greens Harvester - https://www.tilmor.com/en-us/products/2035 https://www.tilmor.com/en-us/products/category/82/babyleaf-harvester The ultimate motorized, high-capacity harvesting machine designed for commercial growers and high-volume operations. It eliminates manual pushing or holding a drill, offering consistent drive speeds, adjustable cutting height, and maximum ergonomics for long harvest days. Empowering farmers to grow healthy food for their communities by being the best place for them to discover equipment and information they need in every season. Subscribe - https://www.youtube.com/channel/UCQqBPJBWKFk_7al2WWColFg Shop & Learn More - https://www.tilmor.com/en-us/products Connect With Us! Facebook - https://www.facebook.com/TilmorProducts/ Instagram - @tilmor_products https://www.tilmor.com/en-us info@tilmor.com | 330.985.0002

Terrateck offers two different styles of Baby Leaf / Greens Harvesters; an electric self propelled version and a manually pushed version powered by a drill. The electric version was designed for the daily harvesting of young shoot and aromatic plant crops and will allow you to harvest cut salads, baby greens, purslane, spinach, etc. The blade and the beaters are adjustable according to the height of vegetation, height of board and desired cutting height. A 60 meter board can be harvested in 12 minutes (estimated time). The drill version is powered by a standard drill/driver, the machine operates the cutter bar, reel, and collection belt — keeping costs down while ensuring dependable performance. A recommended model, such as the DEWALT DCD996P2-QW 3-speed drill, delivers the optimum 1,300 rpm speed for smooth operation. Despite its compact design, this harvester is highly adaptable. Adjustable cutting height, reel, and belt settings allow it to be tailored to different crops and stages of growth. Mounted on a 4-wheel chassis, it provides uniform cutting and ergonomic handling, making it easy to operate in the field.

The Terrateck Baby Leaf Harvester is a walk-behind, full bed harvester designed for fast, efficient, and reliable harvesting of young shoots, baby greens, and aromatic herbs. Built with growers in mind, it helps streamline one of the most labor-intensive tasks in market gardening — turning delicate greens into a profitable crop. With its adjustable blade, reel, and chassis height, the harvester adapts to different bed configurations and crop types, ensuring a clean and consistent cut every time. Powered by a 24V electric drive with two 12V batteries, it provides quiet, low-maintenance performance for daily use. Typical runtime for greens is 5-6 hours, for heavy cutting or more woody material 4-5 hours. A single operator can harvest a 60-meter bed in as little as 12 minutes, dramatically reducing labor costs and harvest time compared to manual methods. Perfect for harvesting cut salads, baby greens, purslane, spinach, etc. Empowering farmers to grow healthy food for their communities by being the best place for them to discover equipment and information they need in every season.

The Terrateck babyleaf harvester was designed for the daily picking of crops of lettuce, green salad, purslane, spinach, etc. The 120 cm-wide cutter bar cuts the vegetation cleanly and precisely. The cutter bar and pick-up reel height can be adjustable according to the height of the vegetation, the height of the strip and the cutting height. This harvester is popular because it is simple to use, ergonomic and allows you to quickly complete your work.

The Terrateck harvester can be used for a variety of greens, herbs, and baby leaf plants. It is a fully electric unit that provides lots of adjustments to meet the needs of your operation and growing system.

Romain and Lydell discuss and demonstrate regular maintenance and troubleshooting tips for the Terrateck Walk Behind Electric Greens Harvester.

Romain and Lydell discuss adjusting the wheel clutch cable on the Terrateck Walk Behind Electric Greens Harvester

Lydell and Romain assembling the Terrateck Drill Powered Greens Harvester

Comparing options for greens harvesting. Are you looking to scale up your salad greens production or speed up your harvest day? In this video, we compare four popular greens harvesters: the Terrateck Greens Harvest Knife, the Farmer’s Friend Quick-Cut Greens Harvester, the Terrateck Drill-Powered Greens Harvester, and the Terrateck Self-Propelled Greens Harvester. 🌾 HARVESTERS FEATURED IN THIS VIDEO: 1️⃣ Terrateck Greens Harvest Knife This is the most budget-friendly manual entry point designed for micro-farms, home growers, and small bed trials. It is great for precision cuts, requires zero fuel or battery overhead, and handles quick spot-harvests without complex setup. 2️⃣ Farmer’s Friend Quick-Cut Greens Harvester A classic market-gardening staple powered by a standard cordless drill. It features a serrated blade and rotating macrame reels that gently sweep salad mixes, spinach, and mesclun directly into your harvest tote. 3️⃣ Terrateck Drill-Powered Walk Behind Greens Harvester - https://www.tilmor.com/en-us/products/2024 A rugged, high-efficiency drill-driven alternative engineered for clean, uniform cuts across standard market garden beds. It is built with durable components and smooth height adjustment to handle dense plantings with minimal crop damage. 4️⃣ Terrateck Self-Propelled Walk Behind Greens Harvester - https://www.tilmor.com/en-us/products/2035 https://www.tilmor.com/en-us/products/category/82/babyleaf-harvester The ultimate motorized, high-capacity harvesting machine designed for commercial growers and high-volume operations. It eliminates manual pushing or holding a drill, offering consistent drive speeds, adjustable cutting height, and maximum ergonomics for long harvest days. Empowering farmers to grow healthy food for their communities by being the best place for them to discover equipment and information they need in every season. Subscribe - https://www.youtube.com/channel/UCQqBPJBWKFk_7al2WWColFg Shop & Learn More - https://www.tilmor.com/en-us/products Connect With Us! Facebook - https://www.facebook.com/TilmorProducts/ Instagram - @tilmor_products https://www.tilmor.com/en-us info@tilmor.com | 330.985.0002

Terrateck offers two different styles of Baby Leaf / Greens Harvesters; an electric self propelled version and a manually pushed version powered by a drill. The electric version was designed for the daily harvesting of young shoot and aromatic plant crops and will allow you to harvest cut salads, baby greens, purslane, spinach, etc. The blade and the beaters are adjustable according to the height of vegetation, height of board and desired cutting height. A 60 meter board can be harvested in 12 minutes (estimated time). The drill version is powered by a standard drill/driver, the machine operates the cutter bar, reel, and collection belt — keeping costs down while ensuring dependable performance. A recommended model, such as the DEWALT DCD996P2-QW 3-speed drill, delivers the optimum 1,300 rpm speed for smooth operation. Despite its compact design, this harvester is highly adaptable. Adjustable cutting height, reel, and belt settings allow it to be tailored to different crops and stages of growth. Mounted on a 4-wheel chassis, it provides uniform cutting and ergonomic handling, making it easy to operate in the field.

Lydell and Romain going over field setup of the Terrateck Drill Powered Greens Harvester.

Lydell and Romain going over maintenance of the Terrateck Drill Powered Greens Harvester.

Shannon Didier of Qwal̓ímak Nlep̓cálten (Mosquito Garden) shares how the Power Ox positively impacted their operation. Listen as Shannon talks through the Two Wheel Tractor Tools she uses and what benefits they offer. Along with improving efficiency, mechanical cultivation has kept the crew motivated and the fields clean. Qwal̓ímak Nlep̓cálten (Mosquito Garden) is a market garden aimed at providing food security for the Lil’wat Nation, growing a variety of vegetables using organic and sustainable practices, and providing training and education around growing and preserving food. The farm is on traditional Lil’wat lands near Lillooet Lake, BC.

Lauren Padovano of Happy Day Farmhaus tells the story of why the Power Ox was a good fit for their farm and how it enabled them to scale efficiently. Increase your farm scale without increased labor. Manage weed pressure easier with the Tilmor 240 Power Ox. It has a balanced, light-weight design for optimal maneuverability and control. The Power Ox's high clearance and precise tool tracking make it the ideal two wheel tractor for cultivation. Spotlight Features: - Throttle Control on Handle - Honda GX120 Engine - Robust Drive System - 13.5" Ground Clearance - Three width settings on main frame - See image below - Quick handle height adjustment - 4" Wide Bar Tires

Enjoy a tool tour from Teddy Bolkas of Thera Farms in Brentwood, NY on Long Island! Teddy shares what he has learned from experience and from other farmers about the implements that make a difference for market growers.

Watch as Lauren Padovano from Happy Day Farmhaus cultivates corn and gets ready for a new bed with the Power Ox 240. The walk behind tractor has a basket weeder attachment to disrupt the top few inches of soil and flick out white-thread stage weeds. The gap in between the baskets allow the corn to pass through the center and when she uses it for stale bedding, two passes will cover an entire area without needing to move the baskets.

Increase your farm scale without increased labor. Manage weed pressure easier with the Tilmor 240 Power Ox. It has a balanced, light-weight design for optimal maneuverability and control. The Power Ox's high clearance and precise tool tracking make it the ideal two wheel tractor for cultivation. Spotlight Features: • Throttle Control on Handle • Honda GX120 Engine • Robust Drive System • 13.5" Ground Clearance • Three width settings on main frame • Quick handle height adjustment • 4" Wide Bar Tires

Conquer weeds and increase production with the Power Ox. Designed for planting, cultivation, and light hilling, the Power Ox is a great compliment for growers that already have primary tillage machines. One person can switch between implements by removing a single pin with no need for tools. Spotlight Features: - Throttle Control on Handle - Honda GX120 Engine - Robust Drive System - 13.5" Ground Clearance - Three width settings on main frame - See image below - Quick handle height adjustment - 4" Wide Bar Tires Small growers face unique challenges and often must rely on older equipment that was developed many years ago for mechanized cultivation. This often means farmers are forced to rely on parts that are obsolete, poorly constructed or difficult to find. Our goal is to produce a variety of implements for planting, cultivation, harvest, post-harvest, and more. These implements will be built to last and fully supported by Tilmor, making it easy to find and purchase the equipment you need to maintain your farm. Visit our online marketplace - https://www.tilmor.com/en-us/products Products featured in this video: Subscribe to our channel! https://www.youtube.com/channel/UCQqBPJBWKFk_7al2WWColFg For more information, visit https://www.tilmor.com/en-us Tilmor Marketplace: https://www.tilmor.com/en-us/products Find Us Online! Facebook - https://www.facebook.com/TilmorProducts/ Instagram - @tilmor_products

Adding weight to an implement can be an effective way to work with harder or crusted soil. Lydell and Dustin talk specifically in this video about adding weight to the basket weeder behind a Power Ox or using down pressure in order to break through some heavily crusted soil.

Recently, we have received more calls regarding the chain on the basket weeder. This video shows you a quick tip on assembling the master chain link correctly and making sure the basket weeder is aligned. If you have any further issues or questions, feel free to get in touch with us! Two Wheel Tractor Basket Weeder: https://www.tilmor.com/en-us/products/296/kit-basket-weeder-35 Small growers face unique challenges and often must rely on older equipment that was developed many years ago for mechanized cultivation. This often means farmers are forced to rely on parts that are obsolete, poorly constructed or difficult to find. Our goal is to produce a variety of implements for planting, cultivation, harvest, post-harvest, and more. These implements will be built to last and fully supported by Tilmor, making it easy to find and purchase the equipment you need to maintain your farm. Visit our online marketplace - https://www.tilmor.com/en-us/products Products featured in this video: Two Wheel Tractor Basket Weeder: https://www.tilmor.com/en-us/products/296/kit-basket-weeder-35 Subscribe to our channel! https://www.youtube.com/channel/UCQqBPJBWKFk_7al2WWColFg For more information, visit https://www.tilmor.com/en-us Tilmor Marketplace: https://www.tilmor.com/en-us/products Find Us Online! Facebook - https://www.facebook.com/TilmorProducts/ Instagram - @tilmor_products

The CropCare® Plastic Mulch Layer is a bed shaper and plastic mulch layer combo that allows you to do both at the same time. It’s a heavy-duty workhorse that is adjustable to meet the many different applications that exist in the mulch bed world. You can adjust for width, bed height, and tension on the plastic itself.