Plastic Lifter/Winder Combo
Número de Parte del Fabricante: KIT-1094
Tilmor Part Number: KIT-1094
par
À Partir de $5,092.00
Tired of removing your plastic mulch by hand? Eliminate the need for hand removal of plastic and save labor/money in the process. The Tilmor Plastic Lifter and Winder will help you take back your field and profit with ease!
The special Combo Cat. 1 toolbars will allow you to lift and wind plastic at the same time on standard 3" to 4" raised beds. Taller beds may require separate lifting and winding operations. Depending on debris, plastic thickness and width, it will vary how far the winder can go before needing emptied but we estimate that it will hold 300-350ft of rolled plastic.
This system can be used on low horsepower tractors down to 20 horsepower. The lifter has a wide adjustment range, allowing you to fit the width of your plastic (3 ft., 4 ft. or 5 ft.). The plastic winder is ground driven, meaning that whatever speed you're traveling, the winder is spinning appropriately. The winder also spins in a direction that allows for dirt and debris to be shed from the plastic as it winds.
The special Combo Cat. 1 toolbars will allow you to lift and wind plastic at the same time on standard 3" to 4" raised beds. Taller beds may require separate lifting and winding operations. Depending on debris, plastic thickness and width, it will vary how far the winder can go before needing emptied but we estimate that it will hold 300-350ft of rolled plastic.
This system can be used on low horsepower tractors down to 20 horsepower. The lifter has a wide adjustment range, allowing you to fit the width of your plastic (3 ft., 4 ft. or 5 ft.). The plastic winder is ground driven, meaning that whatever speed you're traveling, the winder is spinning appropriately. The winder also spins in a direction that allows for dirt and debris to be shed from the plastic as it winds.
| Nom | 76 inch Toolbar, Cat. 1 | Lower Toolbar, Cat.1/Tilmor 76" | Plastic Winder | Plastic Lifter | Modular Tool Bar 24" - 2" Square | Height Adjustment Clamp | Gauge Wheel | ToolBar To ToolBar Connector | 2" to 2" Square Tube Cross Clamp | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image |
|
|
|
|
|
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Numéro de Pièce Tilmor | KIT-1028 | 49-4107 | 48-11400 | KIT-1037 | AA-1081 | AA-9059 | AW-9061 | AA-9072 | AA-9082 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| GTIN | 00850002085129 | 00850002085488 | 00850002085495 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Numéro de la Pièce du Fabricant | N/A | N/A | N/A | N/A | AA-1081 | N/A | N/A | N/A | N/A | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Poids | 70.95 Kg. | 46.1500 Kg. | 335.0000 Kg. | 110 Kg. | 9.5000 Kg. | 6.5000 Kg. | 26.3000 Kg. | 20.2000 Kg. | 4.0000 Kg. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Résidents de la Californie | ATTENTION: Cliquez ici pour plus d'informations sur la Proposition 65 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Garantie | Garantie limitée d'un an au propriétaire d'origine. Cliquez ici pour plus d'informations. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||