Plastic Winder Reel Axle Flange Bearing Replacement

These instructions are for the replacement of the Tilmor Plastic Winder Reel Axle Flange Bearings.

Tools
7/16" Wrench
9/16" Wrench
9/16" Socket
Ratchet
3/16" Hex Key
Punch
Hammer
Dead blow Hammer
7/16" Socket
Torque Wrench
Estimated Time

2 hrs

Before You Begin
1
Adjust the Belt Tension
2
Remove the Pulley Cover
3
Remove the Belt
4
Remove the Reel Axle Drive Pulley
5
6
Remove the Reel Assembly
7
8
Remove the Flange Bearing Collars
9
10
11
Remove the Reel Axle
12
Remove the Flange Bearing
13
14
Position the Flange Bearing
15
16
17
18
Install the Bearing Collars
19
20
21
22
23
Install the Reel Axle Drive Pulley
24
25
26
27
Install the Drive Belt
28
Adjust the Belt Tension
29
30
Install the Reel Assembly
31
32