Guarantee

Similar Products

Finger Weeders

Manufacturer Part Number:

Tilmor Part Number:

Price: $142.04


The 2019 redesign offers the ability to bolt on a variety of shank options from flat to square.

Specifically designed for in-row cultivation, the finger weeder uproots small and just emerging weeds. The ground engaging steel drive plate turns the flexible polyurethane fingers at a faster speed to "flick" out emerging weeds at the hair stage.

Features:
  • Suitable for almost all crops planted in rows with a sufficient distance between the rows
  • Good on light to medium-heavy clay soils
  • Best when combined with implements such as vegetable knives or spyders that run in front
  • Optimum weed stage: Cotyledon to 2-leaf
  • Optimum Crop Size: When properly rooted

Finger Diameter

9" Finger Weeder with Medium Fingers and Flat Shank

The finger is measured across its diameter. This selection includes hub and drive plate.

Finger Weeder drive hub

For row spacing's as close as 13-inches. The finger is measured across its diameter. This selection includes hub and drive plate.

For row spacing's as close as 15-inches. The finger is measured across its diameter. This selection includes hub and drive plate.

AW-9003 hub without finger or shank

This does not include a drive plate. If you would like a drive plate please select its corresponding size above.

Finger Hardness

Sweep is not included.

Medium polyurethane finger for 13" Finger Weeder replacement

Medium Hardness - Recommended in sandy, lighter soils with delicate crops.
Direct replacement for Tilmor, Steketee, and Garford finger weeders.

13" Hard Finger Replacement

Hard - Recommended in heavier, clay soils with well-rooted, hardy crops.
Direct replacement for Tilmor, Steketee, and Garford finger weeders.

Finger Hardness

No rubber fingers are included, you must provide your own.

Soft polyurethane finger for 9" Finger Weeder replacement

Soft Hardness - Recommended in sandy, lighter soils with delicate crops. Direct replacement for Tilmor, Steketee, and Garford finger weeders.

Medium polyurethane finger for 9" Finger Weeder replacement

Medium - Can be used in a variety of different soil types. Direct replacement for Tilmor, Steketee, and Garford finger weeders.

Finger Hardness

Medium polyurethane finger for 13" Finger Weeder replacement

Medium Hardness - Recommended in sandy, lighter soils with delicate crops.
Direct replacement for Tilmor, Steketee, and Garford finger weeders.

13" Hard Finger Replacement

Hard - Recommended in heavier, clay soils with well-rooted, hardy crops.
Direct replacement for Tilmor, Steketee, and Garford finger weeders.

Sweep is not included.

Finger Hardness

Sweep is not included.

15" finger weeders - gold

Gold

Shank Type

No Finger Weeder Shank is included to mount Finger Weeders to a toolbar. If this option is selected, you must provide your own mounting option.

Flat Shank - 1-3/16" x 3/8"

Dimensions: 13.56" x 1.19" x .375"
Compatible with Steketee and Garford mounts/clamps.

Offset Flat Shank - 1-3/16" x 3/8"

Dimensions: 13.56" x 1.19" x .375" with a .44" offset where the implement mounts.
Compatible with Steketee and Garford mounts/clamps.

Flat Shank Tool Standard - Thiessen

Mount vegetable knives or finger weeders onto toolbars.
Dimensions: 1/2" x 1-1/4" x 13-3/4"
Requires Thiessen or Planet Jr. style clamps.

Modbar 12"

Nominal Length: 15.5"
1.5" Square Tube
Designed for growers using higher clearance toolbars

Modbar 18"

Nominal Length: 21.5"
1.5" Square Tube
Designed for growers using higher clearance toolbars

Modbar 24"

Nominal Length: 27.5"
1.5" Square Tube
Designed for growers using higher clearance toolbars

37" ModBar - Modular Toolbar - 2" Square Tube

Nominal length: 40.5"
Length from outside hole to outside hole: 37"

Clamp

No clamp is included. You must provide your own clamp.

standard cross clamp - rectangular toolbar to flat shank

Mounts Finger Weeders to 5/8x1-1/4 Toolbars.

center mount- rectangular toolbar to flat shank

Mounts Finger Weeders to 5/8x1-1/4 Toolbars. Can attach tooling in the center of the front toolbar, or along the sides of the trailing arms.

Clamp

No clamp is included. You must provide your own clamp.

Clamp for rectangle shank tools

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
Learn More

flat shank to 1.5 inch square tube clamp

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 1.5" square toolbar.
Learn More

flat shank to 2 inch square tube clamp

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar. This clamp is narrower and more robust than the AA-9005 clamp
Learn More

Clamp

No clamp is included. You must provide your own clamp.

Clamp for rectangle shank tools

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
Learn More

flat shank to 1.5 inch square tube clamp

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 1.5" square toolbar.
Learn More

flat shank to 2 inch square tube clamp

The Flat Shank Clamp fits a flat bar (3/8” x 1-3/8” profile) such as the Finger Weeder shank and mounts it rigidly to the 2" square toolbar.
Learn More

Clamp

No clamp is included. You must provide your own clamp.

Clamp

No clamp is included. You must provide your own clamp.

Clamp

No clamp is included. You must provide your own clamp.

Clamp

No clamp is included. You must provide your own clamp.

Price:

On backorder

Est. ship date: Oct 18, 2021

Ships in 2-3 business days

This product, or its configuration, is not currently in stock.

This product or its configuration is coming soon.

Call for availability

Qty

Tilmor Finger Weeder Cultivating Soybeans

Reduce your impact - Maximize your results

In-row cultivation is a challenging part of any farm operation. Finger weeders make this job easier, by reducing the need for hand hoeing and ensuring small, germinating weeds are tossed out.

How it works:

  • The polyurethane fingers turn in between the crop row, driven by the steel fingers, dislodging small weeds.
  • Ball-bearing construction ensures trouble free operation.
  • Ideal for use in well established brassicas like broccoli, cauliflower, and cabbage.
  • The Finger weeder is suitable for weeding at typical cultivation speeds.

High Efficiency Weed Removal

Research has shown a weed reduction of 60 percent is feasible by using finger weeders. Finger weeders are most effective when stacking with tools that run in front of the fingers such as beet knives and torsion weeders. This percentage could be increased to 90 percent by combining the finger weeder with a torsion weeder.

Tips:
  • Increase the distance between fingers to reduce aggressiveness and decrease the distance to increase aggressiveness
  • Soil that is dry or mostly dry is preferable
  • Operating implements such as vegetable knives, cutaway discs, or spyders in front of the finger weeders will improve their effectiveness
  • Cultivating too early or too aggressively can uproot plants
  • For young crops: Begin with 1" between fingers
  • For established crops: 2" max overlap depending on the type of crop
Tilmor Finger Weeder Cultivating Soybeans

Name None Flat Shank Offset Flat Shank Tool Standard (1/2" x 1-1/4" Flat Shank) Modular Tool Bar 12" - 1.5" Square Modular Tool Bar 18" - 1.5" Square Modular Tool Bar 24" - 1.5" Square Modular Tool Bar 37" - 1.5" Square 9" 13" Finger Weeder Kit 15" Finger Weeder Kit 13"
Image Flat Shank - 1-3/16" x 3/8" Offset Flat Shank - 1-3/16" x 3/8" Flat Shank Tool Standard - Thiessen Modbar 12" Modbar 18" Modbar 24" 37" ModBar - Modular Toolbar - 2" Square Tube 9" Finger Weeder with Medium Fingers and Flat Shank Finger Weeder drive hub AW-9003 hub without finger or shank
Tilmor Part Number N/A AW-1140 AW-1164 PA-9006 AA-1094 AA-1095 AA-1096 AA-1105 AW-9040 KIT-1048 KIT-1049 AW-9003
Weight 0 lbs. 1.6500 lbs. 1.6500 lbs. 2.3500 lbs. 3.5000 lbs. 5.5000 lbs. 7.5000 lbs. 7.0000 lbs. 8.0000 lbs. 10 lbs. 13 lbs. 8.0000 lbs.
California Residents WARNING: Click here for more information on Proposition 65
Warranty Limited 1 year warranty to original owner. Click here for more information.

Similar Products