Ruedas Arañas de 12"

The Spyder has been an important cultivation tool for growers since it was designed, manufactured and sold by the Bezzerides Brothers Inc. located in Orosi, California. Because the Bezzerides Brothers no longer produce the Spyder, Tilmor has received permission to manufacture and sell this important tool once again. Features: - Run at slow speeds to pull soil and weeds away from the row and fracture close to the row in small crops. - Run at slow speeds or higher speeds straight to fracture close to the row and act as rolling shield to guard young crops. - Great option to use when pulled behind horse drawn equipment for hilling as they will work at slower speeds unlike a sweep that must be run faster. - In more mature crops they can be angled in to throw soil into the row and fracture soil in the row to bury larger weeds and cover the base of larger crops to stimulate new root growth and a deeper aerobic zone in your fields. - At any stage they can be run in tandem with sweeps, hoes, or points to fracture and tumble the soil and create a beautiful non-slabbed soil structure behind your cultivator pass. - The unique design allows for operation in heavier soil without slabbing and/or crusting that results from a hilling disk or other more conventional tools. - Excellent tools to pair with finger weeders in heavier soil to fracture ahead of the fingers then the fingers can flick weeds out of the soil in the row. - Good to pair with torsion weeders to get right into the row when weeding young crops. Rebuild and weed bed shoulders when run at a high speed and angled in. Operating Instructions: Install Spyders on each side of the plant row with teeth toward the plants and pointing downward at the rear. When the curved teeth point "up" at the rear, their action is more severe. They should operate approximately at a forty five degree angle to the row at desired depth.

https://www.tilmor.com/en-us/products/257/spyder-disc-assembly Acerca del Spyder o rueda araña La rueda araña ha sido una herramienta de cultivo importante para los productores desde que fue diseñada, fabricada y vendida por Bezzerides Brothers Inc. ubicado en Orosi, California. Como los Bezzerides Brothers ya no producen la rueda araña, Tilmor ha recibido permiso para fabricar y vender esta importante herramienta una vez más. Características: - Correr a velocidades lentas para jalar el suelo y las malezas largo del surco, rompiendo cerca de la línea de plantas en cultivos pequeños. - Correr a velocidades lentas o más altas para romper cerca de la fila y actuar como escudo rodante de protección en cultivos jóvenes. - Excelente opción para usar cuando se jala detrás de un equipo tirado por caballos para aporque bajo, ya que funcionarán a velocidades más lentas, a diferencia de un barrido que debe ejecutarse más rápido. - En cultivos más adultos, pueden inclinarse para tirar el suelo en la fila de las plantas, enterrando grandes hierbas y cubriendo la base de las plantas como un aporque suave para estimular el crecimiento de nuevas raíces y una zona aeróbica más profunda en sus campos. { *} En cualquier etapa, se pueden ejecutar en conjunto con escardillos, azadas o puas para romper y voltear el suelo creando una estructura de suelo bella y sin losas detrás de su pase de cultivador. - El diseño único permite la operación en suelos más pesados sin losas y/o costras que resultan del corte de un disco u otras herramientas más convencionales. - Excelente herramienta para juntarse con cultivadores de dedos en suelos pesados y así las malezas puedan ser removidas más eficientemente de la fila de plantas. - Es bueno juntarlos con los cultivadores de torsión para entrar directamente en la fila de los cultivos jóvenes cuando se eliminan las malezas. - Reconstruya y desmalece los lomos de las camas cuando se trabaja en ángulo y a alta velocidad. Instrucciones de operación: Instale Spyders o ruedas araña en cada lado de la hilera de plantas, con los dientes hacia estas y apuntando hacia abajo en la parte trasera. Cuando los dientes curvos apuntan "hacia arriba" en la parte trasera, su acción es más severa. Deben operar aproximadamente en un ángulo de cuarenta y cinco grados con respecto a la fila, a la profundidad deseada.

Tilmor plastic layer is a modular design for laying 3' and 4' plastic and up to two rows of standard drip tape. The innovative design incorporates easy to adjust tire and disc tension. Small growers face unique challenges and often must rely on older equipment that was developed many years ago for mechanized cultivation. This often means farmers are forced to rely on parts that are obsolete, poorly constructed or difficult to find. Our goal is to produce a variety of implements for planting, cultivation, harvest, post-harvest, and more. These implements will be built to last and fully supported by Tilmor, making it easy to find and purchase the equipment you need to maintain your farm. Visit out online marketplace - https://www.tilmor.com/en-us/products Products featured in this video: Plastic Layer: https://www.tilmor.com/en-us/products/628/plastic-layer Tilmor 520 Tractor: https://www.tilmor.com/en-us/products/33/tilmor-tractor Subscribe to our channel! https://www.youtube.com/channel/UCQqBPJBWKFk_7al2WWColFg For more information, visit https://www.tilmor.com/en-us Tilmor Marketplace: https://www.tilmor.com/en-us/products Find Us Online! Facebook - https://www.facebook.com/TilmorProducts/ Instagram - @tilmor_products

Corners Farm uses two Farmall 140 tractors with Tilmor products like the Plastic Layer, Finger Weeders, the Thiessen Undercutter, and more. As part of a trip to the East, we stopped at Trip's farm to demo the Super E. It was great to hear his experience with his current equipment and then his immediate first impressions after using the Super E for the first time! Products featured in this video: Finger Weeders - https://www.tilmor.com/en-us/products... Undercutter - https://www.tilmor.com/en-us/products... Plastic Layer - https://www.tilmor.com/en-us/products... Spyders - https://www.tilmor.com/en-us/products... Hiller Discs - https://www.tilmor.com/en-us/products... Super E - https://www.tilmor.com/en-us/products...

Stalebedding is a method that can be used to prevent weeds in a shaped bed. It works by creating a weed free starting point that with maintenance can make it much easier to stay weed free throughout the season. There are a number of tools that can be used for stalebedding. The basket weeder and tine weeder combo are demonstrated here.

A period of rainy weather prevented cultivation on this carrot farm. In this video, Adam Welly uses spyders to rip out the purslane that seemed to take over his crop. One pass over the beds damaged the purslane enough to allow the carrots to reclaim the field. Some days are more ideal for farming than others and at Tilmor, we try our best to create tool line-ups that can help you maintain and recover your crops.

Nick Lubecki of Coldco Farm near Pittsburgh PA uses the Plastic Mulch Maintenance Kit containing edge of plastic finger weeders and spyders on his new Super E!