Finger Weeder A-Blade Customizable Kit

Manufacturer Part Number:

Tilmor Part Number:

by Tilmor Ox Logo - Gray

Starting at $1,523.78



Number Of Rows

1 Row Finger Weeder A-Blade Set-up

Frame Kit includes everything needed to mount A-blades and Finger weeders to toolbar for 1 row.

Includes Quantity Stockcode
Flat Shank 4 AW-1140
Flat Shank Clamp 2 AA-9005
Cross Clamp 1 AA-9029
24" Modbar 1 AA-1081
18" Modbar 1 AA-1080
Trailing Arm Mount 1 AW-9044
Flex-Tine Clamp 2 AA-9048
Flex Tine 2 AA-9049
Hardware Kit 1 49-4072

Frame Kit includes everything needed to mount A-blades and Finger weeders to toolbar for 2 rows.

Includes Quantity Stockcode
Flat Shank 7 AW-1140
Flat Shank Clamp 4 AA-9005
Cross Clamp 2 AA-9029
24" Modbar 2 AA-1081
18" Modbar 2 AA-1080
Trailing Arm Mount 2 AW-9044
Flex-Tine Clamp 3 AA-9048
Flex Tine 3 AA-9049
Hardware Kit 2 49-4072

3 row a-blade finger weeder

Frame Kit includes everything needed to mount A-blades and Finger weeders to toolbar for 3 rows.

Includes Quantity Stockcode
Flat Shank 10 AW-1140
Flat Shank Clamp 6 AA-9005
Cross Clamp 3 AA-9029
24" Modbar 3 AA-1081
18" Modbar 3 AA-1080
Trailing Arm Mount 3 AW-9044
Flex-Tine Clamp 4 AA-9048
Flex Tine 4 AA-9049
Hardware Kit 2 49-4072

Finger Size

9" Finger Weeder Hub, Drive Plate and Finger weeder

Includes 2 Hubs & Drive Plates. For row spacing as close as 9-inches. The finger is measured across its diameter. This selection includes hub and drive plate.

13" Finger Weeder with Medium Fingers and Flat Shank

Includes 2 Hubs & Drive Plates. For row spacing as close as 13-inches. The finger is measured across its diameter. This selection includes hub and drive plate.

15" Finger Weeder Hub and Drive Plate Kit

Includes 2 Hubs & Drive Plates. For row spacing as close as 15-inches. The finger is measured across its diameter. This selection includes hub and drive plate.

Finger Hardness

Medium polyurethane finger for 9" Finger Weeder replacement

Includes 2 Finger Weeders Medium Hardness - Recommended in heavier, clay soils with well-rooted, hardy crops. Direct replacement for Tilmor and Steketee finger weeders.

Finger Hardness

Medium polyurethane finger for 13" Finger Weeder replacement

Includes 2 Finger Weeders. Medium - Recommended in sandy, lighter soils with delicate crops. Direct replacement for Tilmor, Steketee, and Garford finger weeders.

13" Hard Finger Replacement

Includes 2 Finger Weeders. Hard - Recommended in heavier, clay soils with well-rooted, hardy crops. Direct replacement for Tilmor, Steketee, and Garford finger weeders.

Finger Hardness

15" finger weeders - gold

Gold Hard - Great for use in medium - heavy soils with rooted crops.
Direct replacement for Tilmor, Kult Kress, Steketee, and Garford finger weeders.

Finger Hardness

15" finger weeders - gold

Includes 2 Finger Weeders. Gold Hard - Great for use in medium - heavy soils with rooted crops. Direct replacement for Tilmor, Kult Kress, Steketee, and Garford finger weeders.

Finger Size

9" Finger Weeder Hub, Drive Plate and Finger weeder

For row spacing as close as 9-inches. The finger is measured across its diameter. This selection includes hub and drive plate.

13" Finger Weeder with Medium Fingers and Flat Shank

For row spacing as close as 13-inches. The finger is measured across its diameter. This selection includes hub and drive plate.

15" Finger Weeder Hub and Drive Plate Kit

For row spacing as close as 15-inches. The finger is measured across its diameter. This selection includes hub and drive plate.

Finger Hardness

Medium polyurethane finger for 9" Finger Weeder replacement

Medium Hardness - Recommended in heavier, clay soils with well-rooted, hardy crops.
Direct replacement for Tilmor and Steketee finger weeders.

Finger Hardness

Medium polyurethane finger for 13" Finger Weeder replacement

Medium - Recommended in sandy, lighter soils with delicate crops.
Direct replacement for Tilmor, Steketee, and Garford finger weeders.

13" Hard Finger Replacement

Hard - Recommended in heavier, clay soils with well-rooted, hardy crops.
Direct replacement for Tilmor, Steketee, and Garford finger weeders.

Finger Hardness

15" finger weeders - gold

Gold Hard - Great for use in medium - heavy soils with rooted crops.
Direct replacement for Tilmor, Kult Kress, Steketee, and Garford finger weeders.

Finger Size

9" Finger Weeder Hub, Drive Plate and Finger weeder

Includes 6 Hubs & Drive Plates. For row spacing as close as 9-inches. The finger is measured across its diameter. This selection includes hub and drive plate.

13" Finger Weeder with Medium Fingers and Flat Shank

Includes 6 Hubs & Drive Plates. For row spacing as close as 13-inches. The finger is measured across its diameter. This selection includes hub and drive plate.

15" Finger Weeder Hub and Drive Plate Kit

Includes 6 Hubs & Drive Plates. For row spacing as close as 15-inches. The finger is measured across its diameter. This selection includes hub and drive plate.

Finger Hardness

Medium polyurethane finger for 9" Finger Weeder replacement

Includes 6 Finger Weeders. Medium Hardness - Recommended in heavier, clay soils with well-rooted, hardy crops. Direct replacement for Tilmor and Steketee finger weeders.

Finger Hardness

Medium polyurethane finger for 13" Finger Weeder replacement

Includes 6 Finger Weeders. Medium - Recommended in sandy, lighter soils with delicate crops. Direct replacement for Tilmor, Steketee, and Garford finger weeders.

13" Hard Finger Replacement

Includes 6 Finger Weeders. Hard - Recommended in heavier, clay soils with well-rooted, hardy crops. Direct replacement for Tilmor, Steketee, and Garford finger weeders.

Finger Hardness

15" finger weeders - gold

Includes 6 Finger Weeders. Gold Hard - Great for use in medium - heavy soils with rooted crops. Direct replacement for Tilmor, Kult Kress, Steketee, and Garford finger weeders.

A-Blade Size Inside Rows

4 inch A-blade

Includes 1 A-Blades. 4 inch cutting width. For inside row cultivation.

6 inch A-blade

Includes 1 A-Blades. 6 inch cutting width. For inside row cultivation.

6 inch A-blade

Includes 1 A-Blades. 8 inch cutting width. For inside row cultivation.

10 inch A-blade

Includes 1 A-Blades. 10 inch cutting width. For inside row cultivation.

A-Blade Size Inside Rows

4 inch A-blade

Includes 2 A-Blades. 4 inch cutting width. For between inside row cultivation.

6 inch A-blade

Includes 2 A-Blades. 6 inch cutting width. For between inside row cultivation.

6 inch A-blade

Includes 2 A-Blades. 8 inch cutting width. For between inside row cultivation.

10 inch A-blade

Includes 2 A-Blades. 10 inch cutting width. For between inside row cultivation.

A-Blade Size Outside Rows

4 inch A-blade

Includes 2 A-Blades. 4 inch cutting width. For outside row cultivation.

6 inch A-blade

Includes 2 A-Blades. 6 inch cutting width. For outside row cultivation.

6 inch A-blade

Includes 2 A-Blades. 8 inch cutting width. For outside row cultivation.

10 inch A-blade

Includes 2 A-Blades. 10 inch cutting width. For outside row cultivation.

A-Blade Size Outside Rows

4 inch A-blade

Includes 2 A-Blades. 4 inch cutting width. For outside row cultivation.

6 inch A-blade

Includes 2 A-Blades. 6 inch cutting width. For outside row cultivation.

6 inch A-blade

Includes 2 A-Blades. 8 inch cutting width. For outside row cultivation.

10 inch A-blade

Includes 2 A-Blades. 10 inch cutting width. For outside row cultivation.

A-Blade Size Outside Rows

4 inch A-blade

Includes 2 A-Blades. 4 inch cutting width. For outside row cultivation.

6 inch A-blade

Includes 2 A-Blades. 6 inch cutting width. For outside row cultivation.

6 inch A-blade

Includes 2 A-Blades. 8 inch cutting width. For outside row cultivation.

10 inch A-blade

Includes 2 A-Blades. 10 inch cutting width. For outside row cultivation.

Toolbar Size

Toolbar Type

Allis-Chalmers G Toolbar Render

Includes a 2" square tube that is 64 inches long and two mounting brackets for your Allis- Chalmers G.

Farmall Toolbar Render

Includes a 2" square tube that is 64 inches long and two mounting brackets for your Farmall tractor.

Kubota Toolbar Render

Toolbars come in two specific lengths, 64 inches and 76 inches. Select the desired length based on seedbed width.

Category 1 Toolbar Render

The Category 1 Toolbar comes in two specific lengths, 64 and 76 inches. Select the length based on desired working width.

Tilmor Toolbar

The Tilmor Toolbar comes in two specific lengths, 64 and 76 inches. Select the length based on desired working width.

Toolbar Type

Tilmor Toolbar

The Tilmor Toolbar comes in two specific lengths, 64 and 76 inches. Select the length based on desired working width.

Allis-Chalmers G Toolbar Render

Includes a 2" square tube that is 76 inches long and two mounting brackets for your Allis- Chalmers G.

Farmall Toolbar Render

Includes a 2" square tube that is 76 inches long and two mounting brackets for your Farmall tractor.

Kubota Toolbar Render

Toolbars come in two specific lengths, 64 inches and 76 inches. Select the desired length based on seedbed width.

Category 1 Toolbar Render

The Category 1 Toolbar comes in two specific lengths, 64 and 76 inches. Select the length based on desired working width.

Price:

Est. ship date: Aug 28, 2024

Ships in 2-3 business days

This product, or its configuration, is out of stock. Call for Availability.

This product or its configuration is coming soon.

Call for availability

Qty


finger weeders

Reduce your impact - Maximize your results

In-row cultivation is a challenging part of any farm operation. Finger weeders make this job easier, by reducing the need for hand hoeing and ensuring small, germinating weeds are tossed out.

How it works:

  • The polyurethane fingers turn in between the crop row, driven by the steel fingers, dislodging small weeds.
  • Ball-bearing construction ensures trouble free operation.
  • Ideal for use in well established brassicas like broccoli, cauliflower, and cabbage.
  • The Finger weeder is suitable for weeding at typical cultivation speeds.

High Efficiency Weed Removal

Research has shown a weed reduction of 60 percent is feasible by using finger weeders. Finger weeders are most effective when stacking with tools that run in front of the fingers such as beet knives and torsion weeders. This percentage could be increased to 90 percent by combining the finger weeder with a torsion weeder.

Tips:
  • Increase the distance between fingers to reduce aggressiveness and decrease the distance to increase aggressiveness
  • Soil that is dry or mostly dry is preferable
  • Operating implements such as vegetable knives, cutaway discs, or spyders in front of the finger weeders will improve their effectiveness
  • Cultivating too early or too aggressively can uproot plants
  • For young crops: Begin with 1" between fingers
  • For established crops: 2" max overlap depending on the type of crop
finger weeder with a-blades
Name 1 Row Finger Weeder A-blade Frame 2 Row Finger Weeder A-blade Frame 3 Row Finger Weeder A-blade Frame 64" Toolbar 76" Toolbar
Image 1 Row Finger Weeder A-Blade Set-up 3 row a-blade finger weeder
Tilmor Part Number KIT-1111 KIT-1112 KIT-1137 N/A N/A
Manufacturer Part Number N/A N/A N/A N/A N/A
Weight 40.44 lbs. 40.44 lbs. 40.44 lbs. 0 lbs. 0 lbs.
California Residents WARNING: Click here for more information on Proposition 65
Warranty Limited 1 year warranty to original owner. Click here for more information.